misplaced tarball?

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

misplaced tarball?

Andrea Bedini
Hello,

h5py build script failed [1] when we upgrade to 1.8.18 because the source tarball is not where expected



I noticed the following file exists though, maybe it’s misplaced? there’s an extra /hdf5-1.8/


Andrea



Dr Andrea Bedini
Data Scientist | Business Computational Specialist
Curtin Institute for Computation
Curtin Business School

Curtin University
Tel | +61 8 9266 2065
Mobile | +61 466 816 560

Email | [hidden email]
Twitter | @andreabedini
Web | www.andreabedini.com




--
Andrea Bedini
@andreabedini, http://www.andreabedini.com

use https://keybase.io/andreabedini to send me encrypted messages
Key fingerprint = 17D5 FB49 FA18 A068 CF53  C5C2 9503 64C1 B2D5 9591





_______________________________________________
Hdf-forum is for HDF software users discussion.
[hidden email]
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: misplaced tarball?

bljones

Hi Andrea,

 

The ./releases/hdf5-1.8/hdf5-1.8.18/ directory is the correct location of the HDF5-1.8.18 software.

 

There were starting to be a lot of files in the releases/ directory, so this was done to keep things manageable.

The other 1.8 releases will be moved (slowly) into the hdf5-1.8/ location. (Similarly, HDF5-1.10 releases are found

in the ./releases/hdf5-1.10/ directory.)

 

Sorry for causing problems!!

 

-Barbara

[hidden email]

 

 

From: Hdf-forum [mailto:[hidden email]] On Behalf Of Andrea Bedini
Sent: Wednesday, December 07, 2016 11:24 PM
To: HDF Users Discussion List
Subject: [Hdf-forum] misplaced tarball?

 

Hello,

 

h5py build script failed [1] when we upgrade to 1.8.18 because the source tarball is not where expected

 

 

 

I noticed the following file exists though, maybe it’s misplaced? there’s an extra /hdf5-1.8/

 

 

Andrea

 

 


Dr Andrea Bedini
Data Scientist | Business Computational Specialist
Curtin Institute for Computation
Curtin Business School

Curtin University
Tel | +61 8 9266 2065
Mobile | +61 466 816 560

Email | [hidden email]
Twitter | @andreabedini
Web | www.andreabedini.com

 

 

 

--
Andrea Bedini
@andreabedini, http://www.andreabedini.com

use https://keybase.io/andreabedini to send me encrypted messages
Key fingerprint = 17D5 FB49 FA18 A068 CF53  C5C2 9503 64C1 B2D5 9591

 

 

 


_______________________________________________
Hdf-forum is for HDF software users discussion.
[hidden email]
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: misplaced tarball?

Andrea Bedini
Hi Barbara,

it’s just an unexpected change. Happy to have a releases/hdf5-1.8/ but that should then have all the 1.8 releases.

Could you do the following?

1) move all the 1.8 releases to releases/hdf5-1.8/ now
2) link back the folders releases/hdf5-1.8/hdf5-1.8.{0..17} to releases/ to current links don’t get broken.

Then you can remove the links releases/hdf5-1.8.{0..17} after an appropriate deprecation warning.

You could just make the symbolic links the other way around (linking releases/hdf5-1.8/hdf5-1.8.{0..17} to releases/hdf5-1.8.{0..17}) but you will need to move the folders eventually so better to do it earlier.

Either choice take less than 5 minutes.

All I care about is a simple logic for our continuous integration script to predict where the release tar balls are going to be. 

Cheers,
Andrea

On 8 Dec. 2016, at 10:37 pm, Barbara Jones <[hidden email]> wrote:

Hi Andrea,
 
The ./releases/hdf5-1.8/hdf5-1.8.18/ directory is the correct location of the HDF5-1.8.18 software.
 
There were starting to be a lot of files in the releases/ directory, so this was done to keep things manageable.
The other 1.8 releases will be moved (slowly) into the hdf5-1.8/ location. (Similarly, HDF5-1.10 releases are found
in the ./releases/hdf5-1.10/ directory.)
 
Sorry for causing problems!!
 
-Barbara
 
From: Hdf-forum [[hidden email]] On Behalf Of Andrea Bedini
Sent: Wednesday, December 07, 2016 11:24 PM
To: HDF Users Discussion List
Subject: [Hdf-forum] misplaced tarball?
 
Hello,
 
h5py build script failed [1] when we upgrade to 1.8.18 because the source tarball is not where expected
 
 
 
I noticed the following file exists though, maybe it’s misplaced? there’s an extra /hdf5-1.8/
 
 
Andrea
 
 

Dr Andrea Bedini
Data Scientist | Business Computational Specialist
Curtin Institute for Computation
Curtin Business School

Curtin University
Tel | +61 8 9266 2065
Mobile | +61 466 816 560

Email | [hidden email]
Twitter | @andreabedini
Web | www.andreabedini.com
 
<image001.png>
 

 

--
Andrea Bedini
@andreabedini, http://www.andreabedini.com

use https://keybase.io/andreabedini to send me encrypted messages
Key fingerprint = 17D5 FB49 FA18 A068 CF53  C5C2 9503 64C1 B2D5 9591
 

 

 
_______________________________________________
Hdf-forum is for HDF software users discussion.
[hidden email]
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

--
Andrea Bedini
@andreabedini, http://www.andreabedini.com

use https://keybase.io/andreabedini to send me encrypted messages
Key fingerprint = 17D5 FB49 FA18 A068 CF53  C5C2 9503 64C1 B2D5 9591





_______________________________________________
Hdf-forum is for HDF software users discussion.
[hidden email]
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: misplaced tarball?

bljones

Hi Andrea,

 

I moved all of the 1.8 releases to hdf5-1.8/ and set up symbolic links to them in the releases/ directory, as you describe.

It will make it easy to just remove the links in the future.

 

Thanks!

-Barbara

 

 

From: Hdf-forum [mailto:[hidden email]] On Behalf Of Andrea Bedini
Sent: Thursday, December 08, 2016 8:30 PM
To: HDF Users Discussion List
Cc: Matthew Brett
Subject: Re: [Hdf-forum] misplaced tarball?

 

Hi Barbara,

 

it’s just an unexpected change. Happy to have a releases/hdf5-1.8/ but that should then have all the 1.8 releases.

 

Could you do the following?

 

1) move all the 1.8 releases to releases/hdf5-1.8/ now

2) link back the folders releases/hdf5-1.8/hdf5-1.8.{0..17} to releases/ to current links don’t get broken.

 

Then you can remove the links releases/hdf5-1.8.{0..17} after an appropriate deprecation warning.

 

You could just make the symbolic links the other way around (linking releases/hdf5-1.8/hdf5-1.8.{0..17} to releases/hdf5-1.8.{0..17}) but you will need to move the folders eventually so better to do it earlier.

 

Either choice take less than 5 minutes.

 

All I care about is a simple logic for our continuous integration script to predict where the release tar balls are going to be. 

 

Cheers,

Andrea

 

On 8 Dec. 2016, at 10:37 pm, Barbara Jones <[hidden email]> wrote:

 

Hi Andrea,

 

The ./releases/hdf5-1.8/hdf5-1.8.18/ directory is the correct location of the HDF5-1.8.18 software.

 

There were starting to be a lot of files in the releases/ directory, so this was done to keep things manageable.

The other 1.8 releases will be moved (slowly) into the hdf5-1.8/ location. (Similarly, HDF5-1.10 releases are found

in the ./releases/hdf5-1.10/ directory.)

 

Sorry for causing problems!!

 

-Barbara

 

 

From: Hdf-forum [[hidden email]] On Behalf Of Andrea Bedini
Sent: Wednesday, December 07, 2016 11:24 PM
To: HDF Users Discussion List
Subject: [Hdf-forum] misplaced tarball?

 

Hello,

 

h5py build script failed [1] when we upgrade to 1.8.18 because the source tarball is not where expected

 

 

 

I noticed the following file exists though, maybe it’s misplaced? there’s an extra /hdf5-1.8/

 

 

Andrea

 

 


Dr Andrea Bedini
Data Scientist | Business Computational Specialist
Curtin Institute for Computation
Curtin Business School

Curtin University
Tel | +61 8 9266 2065
Mobile | +61 466 816 560

Email | [hidden email]
Twitter | @andreabedini
Web | www.andreabedini.com

 

<image001.png>

 

 

--
Andrea Bedini
@andreabedini, http://www.andreabedini.com

use https://keybase.io/andreabedini to send me encrypted messages
Key fingerprint = 17D5 FB49 FA18 A068 CF53  C5C2 9503 64C1 B2D5 9591

 

 

 

_______________________________________________
Hdf-forum is for HDF software users discussion.
[hidden email]
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: 
https://twitter.com/hdf5

 

--
Andrea Bedini
@andreabedini, http://www.andreabedini.com

use https://keybase.io/andreabedini to send me encrypted messages
Key fingerprint = 17D5 FB49 FA18 A068 CF53  C5C2 9503 64C1 B2D5 9591

 

 

 


_______________________________________________
Hdf-forum is for HDF software users discussion.
[hidden email]
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: misplaced tarball?

Andrea Bedini
Fantastic,

Thanks Barbara!
Andrea

On 10 Dec. 2016, at 4:21 am, Barbara Jones <[hidden email]> wrote:

Hi Andrea,
 
I moved all of the 1.8 releases to hdf5-1.8/ and set up symbolic links to them in the releases/ directory, as you describe.
It will make it easy to just remove the links in the future.
 
Thanks!
-Barbara
 
From: Hdf-forum [[hidden email]] On Behalf Of Andrea Bedini
Sent: Thursday, December 08, 2016 8:30 PM
To: HDF Users Discussion List
Cc: Matthew Brett
Subject: Re: [Hdf-forum] misplaced tarball?
 
Hi Barbara,
 
it’s just an unexpected change. Happy to have a releases/hdf5-1.8/ but that should then have all the 1.8 releases.
 
Could you do the following?
 
1) move all the 1.8 releases to releases/hdf5-1.8/ now
2) link back the folders releases/hdf5-1.8/hdf5-1.8.{0..17} to releases/ to current links don’t get broken.
 
Then you can remove the links releases/hdf5-1.8.{0..17} after an appropriate deprecation warning.
 
You could just make the symbolic links the other way around (linking releases/hdf5-1.8/hdf5-1.8.{0..17} to releases/hdf5-1.8.{0..17}) but you will need to move the folders eventually so better to do it earlier.
 
Either choice take less than 5 minutes.
 
All I care about is a simple logic for our continuous integration script to predict where the release tar balls are going to be. 
 
Cheers,
Andrea
 
On 8 Dec. 2016, at 10:37 pm, Barbara Jones <[hidden email]> wrote:
 
Hi Andrea,
 
The ./releases/hdf5-1.8/hdf5-1.8.18/ directory is the correct location of the HDF5-1.8.18 software.
 
There were starting to be a lot of files in the releases/ directory, so this was done to keep things manageable.
The other 1.8 releases will be moved (slowly) into the hdf5-1.8/ location. (Similarly, HDF5-1.10 releases are found
in the ./releases/hdf5-1.10/ directory.)
 
Sorry for causing problems!!
 
-Barbara
 
 
From: Hdf-forum [[hidden email]] On Behalf Of Andrea Bedini
Sent: Wednesday, December 07, 2016 11:24 PM
To: HDF Users Discussion List
Subject: [Hdf-forum] misplaced tarball?
 
Hello,
 
h5py build script failed [1] when we upgrade to 1.8.18 because the source tarball is not where expected
 
 
 
I noticed the following file exists though, maybe it’s misplaced? there’s an extra /hdf5-1.8/
 
 
Andrea
 
 

Dr Andrea Bedini
Data Scientist | Business Computational Specialist
Curtin Institute for Computation
Curtin Business School

Curtin University
Tel | +61 8 9266 2065
Mobile | +61 466 816 560

Email | [hidden email]
Twitter | @andreabedini
Web | www.andreabedini.com
 
<image001.png>
 

 

--
Andrea Bedini
@andreabedini, http://www.andreabedini.com

use https://keybase.io/andreabedini to send me encrypted messages
Key fingerprint = 17D5 FB49 FA18 A068 CF53  C5C2 9503 64C1 B2D5 9591
 

 

 
_______________________________________________
Hdf-forum is for HDF software users discussion.
[hidden email]
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: 
https://twitter.com/hdf5
 

--
Andrea Bedini
@andreabedini, http://www.andreabedini.com

use https://keybase.io/andreabedini to send me encrypted messages
Key fingerprint = 17D5 FB49 FA18 A068 CF53  C5C2 9503 64C1 B2D5 9591
 

 

 
_______________________________________________
Hdf-forum is for HDF software users discussion.
[hidden email]
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

--
Andrea Bedini
@andreabedini, http://www.andreabedini.com

use https://keybase.io/andreabedini to send me encrypted messages
Key fingerprint = 17D5 FB49 FA18 A068 CF53  C5C2 9503 64C1 B2D5 9591





_______________________________________________
Hdf-forum is for HDF software users discussion.
[hidden email]
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5
Loading...